This product is no longer promoted on Made-in-China.com. If you find any infringement or sensitive information of it, please contact us for handling. Thank you.

Manual Hydraulic Pipe Bending Machine Sheet Metal Cutting and Bending Machine

Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company

Basic Info.

Model NO.
YGT4-12
Warranty
12 Months
Customized
Customized
Condition
New
Name
Ygt4-12 Rebar Straightening and Cutting Machine
Hydraulic
Automatic
MOQ
1set
Colour
Customized
Aftersales Service
Yes
Speed
45m/Min-55m/Min
High Speed
Safety
Payment
T/T
Motor Power
7.5kw+4kw
Working Diameter
4mm-12mm
Transport Package
Iron Pallet/Plywood Case
Specification
2700× 800× 1200mm × 1200mm
Trademark
JIUXING
Origin
Henan
HS Code
8461500090
Production Capacity
7000 Pieces/Month

Product Description

Product Description

GT4-12 Rebar Straightening and Cutting Machine



I. Precautions (Instructions before Use)
1. Before using machine, please fill with gear oil and hydraulic oil.
2. Connect with power supply according to instruction of electric cabinet.
3. Before operation each time, the machine shall conduct non-load running for 1 minute. Then operate electric cabinet for feeding materials. After confirming that Steel Bar is straight, operate it normally.
4. When adjusting curve of Steel Bar, the straightening wheel does not press too tightly, or it causes too large load on motor, and straightening wheel bearing is easy to damage. It just needs to adjust the steel bar.
II. The Purposes and Characteristic of Machine
The product is mainly applied in straightening and length cutting and applicable to cold rolling Level III Steel Bar, cold rolling plain round bar, and hot rolling coiled bar round steel.
The machine is highly automatic and pulling speed is fast. It is continuous working system and is equipped with automatic counting shutdown device. After the machine straightening, the surface of linear material shall be free from scratch. The strength loss is small and straightness accuracy is good. At the same time, the machine is easy to operate, blanking process is sample, and production efficiency is high, etc.
III. Main Technical Parameters

V. Structure Performance of the Machine
The machine mainly consists of traction straightening part, hydraulic cutting part, blanking frame, and electric control cabinet.
4.1 Straightening Part

Send your message to this supplier

*From:
*To:
avatar Miss July
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now