Ygt4-12 Rebar Straightening and Cutting Machine

• Model NO.: YGT4-12
• Warranty: 12 Months
• Customized: Customized
• Condition: New
• Name: Ygt4-12 Rebar Straightening and Cutting Machine
• Hydraulic: Automatic
• MOQ: 1set
• Colour: Customized
• Aftersales Service: Yes
• Speed: 45m/Min-55m/Min
• High Speed: Safety
• Payment: T/T
• Motor Power: 7.5kw+4kw
• Working Diameter: 4mm-12mm
• Transport Package: Iron Pallet/Plywood Case
• Specification: 2700× 800× 1200mm × 1200mm
• Trademark: JIUXING
• Origin: Henan
• HS Code: 8461500090
• Production Capacity: 7000 Pieces/Month

Product Description

Product Description

GT4-12 Rebar Straightening and Cutting Machine 

I. Precautions (Instructions before Use)
1. Before using machine, please fill with gear oil and hydraulic oil.
2. Connect with power supply according to instruction of electric cabinet.
3. Before operation each time, the machine shall conduct non-load running for 1 minute. Then operate electric cabinet for feeding materials. After confirming that Steel Bar is straight, operate it normally.
4. When adjusting curve of Steel Bar, the straightening wheel does not press too tightly, or it causes too large load on motor, and straightening wheel bearing is easy to damage. It just needs to adjust the steel bar.
II. The Purposes and Characteristic of Machine
The product is mainly applied in straightening and length cutting and applicable to cold rolling Level III Steel Bar, cold rolling plain round bar, and hot rolling coiled bar round steel.
The machine is highly automatic and pulling speed is fast. It is continuous working system and is equipped with automatic counting shutdown device. After the machine straightening, the surface of linear material shall be free from scratch. The strength loss is small and straightness accuracy is good. At the same time, the machine is easy to operate, blanking process is sample, and production efficiency is high, etc.
III. Main Technical Parameters

Machine Model	GT4-12B Model	GT6-14A GT6-14 AModel
	GT4-12 GT4-12 Model
Scope of Straightening Diameter	Ф4-Ф12mm	Ф6-Ф14mm
Pulling Speed of Linear Materials	45m/min	48-55m/min
Specific Length of Linear Material	500-9000mm() 500-9000mm (extensible)	500-9000mm() 500-9000mm (extensible)
Error of Cutting Length of Linear Material	±0.5cm	±0.5cm
Straightening Degree of Linear Materials	±2mm/m	±2mm/m
Power of Traction Motor	7.5KW-4 7.5KW-4 Pole	11KW-4 11KW-4 Pole
Power of Oil Pump Motor	4KW-4  4KW-4 Pole	5.5KW-4 5.5KW-4 Pole
Quality of the Whole Machine	1000kg	1200kg
Appearance Dimension of Host Machine	2300×800×1100mm	2940×800×1100mm

V. Structure Performance of the Machine
The machine mainly consists of traction straightening part, hydraulic cutting part, blanking frame, and electric control cabinet.
4.1 Straightening Part